Grass-valley 8937 v.1.1.0 User Manual download pdf (Page 30)

30 8937/8937D — Instruction Manual

Configuration

Standard Selections Web Page

Use

this

link

The Standard Selections web page allows you to set loss of signal reporting

and the operating mode for the 8937 and 8937D modules. Refer to the spe-

cific 8937 or 8937D heading below.

8937 Module

Refer to Figure 16 for the Standard Selections web page for the 8937.

Select the

Apply button after making each selection.

Set the following parameters on this web page:

• Set the Report Loss of Sig 1 input presence reporting to

Yes or No. Dis-

abling this control will gray out the Input Signal(s) arrow on the Status

web page graphic shown in Figure 14 on page 29.

• The Input Signal 1 field will report the status of the input signal as one

of the following:

• Signal Present,

• Signal Not Present, or

•

Not Monitored (Report Loss of Sig 1 set to No)

• When the Mode 1 control is set to

Auto, the input bit rate standard is

detected by module and displayed in the

Current Bit Rate1 field.

• When

Bypass is set for Mode 1, Bypass will be displayed in the Current Bit

Rate1

field.

Figure 16. 8937 Standards Selections Web Page

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

No comments

Grass-valley 8937 v.1.1.0 User Manual Page 30