Grass-valley ADX-1901 User Manual

ADX-1901 3G/HD/SD 8 Channel Analog Audio De-Embedder Guide to Installation and Operation M3005-9900-101 2015-04-29

GUIDE TO INSTALLATION AND OPERATION 6 | ADX-1901 2.4.3 Details of rear panel connections 3G/HD/SD IN – Serial digital 3G/HD/SD input Connect a se

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 7 See ANNEX 2 for instructions on installing and removing the SFP interface module, and for plugging

GUIDE TO INSTALLATION AND OPERATION 8 | ADX-1901 3 User Interface 3.1 Control options The ADX-1901 can be controlled in three different ways: •

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 9 Audio – Silence Detection CH1 Audio – Silence Detection CH8   Audio – min lou

GUIDE TO INSTALLATION AND OPERATION 10 | ADX-1901 [+] [–] Used for menu navigation and value modification [SELECT] Gives access to the next me

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 11 5 Remote control using iControl The operation of the ADX-1901 may be controlled using Grass Val

GUIDE TO INSTALLATION AND OPERATION 12 | ADX-1901 If there is an error, the error status message appears in the message area without mouse-over. •

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 13 Icon #4 – Analog Audio Input / Output Status (green) Audio OK (yellow) Yellow alarm condition d

GUIDE TO INSTALLATION AND OPERATION 14 | ADX-1901 5.2.1 Video Input/Output panel (no fiber support) When the ADX-1901 is installed with a rear p

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 15 Additionally, some parameters are measured and their values displayed here: • Temperature • Vol

GUIDE TO INSTALLATION AND OPERATION ADX-1901 Electromagnetic Compatibility This equipment has been tested for verification of compliance with FCC P

GUIDE TO INSTALLATION AND OPERATION 16 | ADX-1901 GPI Status: The GPI Content icon shows the presence of GPI information in the embedded timecode

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 17 SDID Associated channel pair 01 No association, or only one audio program (default value) 02 Ch

GUIDE TO INSTALLATION AND OPERATION 18 | ADX-1901 5.4.2 The Status tab: Audio Type Status – the format of audio signals in each of the 16 audio

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 19 • If you select this option, the SUM (A+B) Level pull-down is activated, allowing you to reduce

GUIDE TO INSTALLATION AND OPERATION 20 | ADX-1901 5.6 Audio Programs panel The Audio Programs panel provides resources to define eight audio prog

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 21 Each of these has predetermined values for Target, Short Term Time Window and Relative Gating, as

GUIDE TO INSTALLATION AND OPERATION 22 | ADX-1901 Dialnorm: this pulldown selects the dialog normalization level. Select OFF to prevent the downmi

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 23 Enable Loudness Monitoring turns all loudness monitoring functions ON or OFF RESET resets the me

GUIDE TO INSTALLATION AND OPERATION 24 | ADX-1901 Coding Mode Program Channels Left Right Center LFE Ls Rs 1/0 X 2/0 X X

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 25 Video Black Detection This alarm detects the presence of a continuous black signal on the input

GUIDE TO INSTALLATION AND OPERATION ADX-1901 Table of Contents 1 ADX-1901 3G/HD/SD 8 Channel Analog Audio De- Embedder ...

GUIDE TO INSTALLATION AND OPERATION 26 | ADX-1901 Use the LED Color pull-down to choose the color that will be displayed by the status LED on the c

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 27 displayed by the status LED on the card edge when an Overload alarm is set. Choices are: • Green

GUIDE TO INSTALLATION AND OPERATION 28 | ADX-1901 Use the LED Color pulldown to choose the color that will be displayed by the status LED on the ca

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 29 5.10 Monitoring panel The Remote Audio Level Meter (RALM) panel displays audio output level mete

GUIDE TO INSTALLATION AND OPERATION 30 | ADX-1901 The Phasemeter (located at the bottom of the RALM meter display) is a small meter that represents

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 31 5.12 Factory/Presets panel Factory Section Load Factory: Clicking this button will restore the

GUIDE TO INSTALLATION AND OPERATION 32 | ADX-1901 Copy profile from This line shows this ADX-1901 card, and identifies it by App server, Densité f

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 33 The Profile column shows the same information as is shown for the current card in the Copy profil

GUIDE TO INSTALLATION AND OPERATION 34 | ADX-1901 Overall Alarm This column allows configuration of the contribution of each individual alarm to th

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 35 Copy to other cards Click this button to open a panel that allows the alarm configuration set for

GUIDE TO INSTALLATION AND OPERATION ADX-1901 5.10.2 Meter Ballistics Config tab ...

GUIDE TO INSTALLATION AND OPERATION 36 | ADX-1901 5.14 Info panel When the ADX-1901 is included in an iControl environment, certain information ab

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 37 • Remote System Administration – opens the Joining Locators window, which lists remote lookup se

GUIDE TO INSTALLATION AND OPERATION 38 | ADX-1901 6 Specifications Analog Audio Outputs (8) Signal: balanced analog audio Impedance: <

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 39 OPTICAL VIDEO INPUT (0 or 1) Refer to SFP module specifications: SFP-R-LC, SFP-RT-S13-LC, SFP-

GUIDE TO INSTALLATION AND OPERATION 40 | ADX-1901 7 Grass Valley Technical Support For technical assistance, please contact the Grass Valley Tec

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 41 ANNEX 1 – ADX-1901 Local User Interface LEV1 LEV2 LEV3 LEV4 VALUES Conditions

GUIDE TO INSTALLATION AND OPERATION 42 | ADX-1901 ANNEX 2 – Installing the Optical Interface Installing and removing the Fiber I/O interface cartr

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 43 3. Slide the module straight into the socket, and push gently until it clicks into position.

GUIDE TO INSTALLATION AND OPERATION 44 | ADX-1901 ANNEX 3 - Loudness Logging and the Miranda Audio Loudness Analyzer Activating and Managing Loudn

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 45 Starting the Audio Loudness Analyzer from iControl The Audio Loudness Analyzer processes the log

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 1 1 ADX-1901 3G/HD/SD 8 Channel Analog Audio De- Embedder 1.1 Introduction The ADX-1901 is an

GUIDE TO INSTALLATION AND OPERATION 2 | ADX-1901 1.3 Functional Block Diagram Figure 1.1 ADX-1901 Functional Block Diagram

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 3 2 Installation 2.1 Installation of Rear Connector Panels Grass Valley Densité-series cards are

GUIDE TO INSTALLATION AND OPERATION 4 | ADX-1901 To install the connector panel: Note – the procedure is the same for both Densité-2 and Densité-3

GUIDE TO INSTALLATION AND OPERATION ADX-1901 | 5 2.4 Rear Panels and Connectors 2.4.1 Images of Rear Panel Connectors The four available rear pan