Grass-valley TTN-BVS-0808 User Manual

MANUAL PART NO. 04-049744-004 Rev. 2MARCH 04, 2003 INSTALLATION MANUAL TRITON routing switcher Analog Video Router 8x8 Product model no. TTN-BVS-0808

BVS-0808 Rev. 2 2 2 Power connection Do not connect mains to the desktop power supply before connecting the power supply to the router. Connect

BVS-0808 Rev. 2 3 4 NCB connection Via the Network Control Bus system several routers and control panels can be interconnected. The standard

BVS-0808 Rev. 2 4 4.3 Pin-out and cable type 4.3.1 RJ45 connectors On some Triton devices, the NCB cable can be connected to RJ-45 connectors.

BVS-0808 Rev. 2 5 4.3.3 RJ45 to 5-pin DIN converter In configurations that include both devices with RJ45 connectors, and devices with 5-pin

BVS-0808 Rev. 2 6 o Universal Control Panel to control all devices above, with user configurable default level. • Pay attention to the figure b

BVS-0808 Rev. 2 7 5 Router configuration 5.1 Router level Switch 1 - 4 on the configuration switch set the router’s level for communication w

BVS-0808 Rev. 2 8 5.2 Router mode The BVS-0808 router allows switching in different modes. You can choose among: 8x8 Composite Video 4x4

BVS-0808 Rev. 2 9 C4 8 C4 8 RGBS RGBS Signal Input RGBS Signal Output S1 1 S1 1 S2 2 S2 2 G1 3 G1

BVS-0808 Rev. 2 10 5.4 Power up mode Switch 8 on the configuration switch defines the power up mode. The BVS-0808 router provides two modes for

BVS-0808 Rev. 2 11 7 Control and connection of Triton systems, interface protocol 7.1 Important notes regarding the Triton Control Protocol

ii Headquarters Thomson Broadcast Systems 17 rue du Petit Albi - BP 8244 95801 Cergy Pontoise Cedex FRANCE Thomson Broadcast and Media Solutions, Inc

BVS-0808 Rev. 2 12 7.2.2 Example: Several units connected by NCB Messages sent to the RS232 of a single unit will be returned once no matter what

BVS-0808 Rev. 2 13 7.5 Commands 7.5.1 Audio crosspoint set Only for use with Audio routers. Command for setting of crosspoints: 1001n

BVS-0808 Rev. 2 14 7.5.4 Video crosspoint set acknowledge Only for use with Video routers. Command for acknowledging setting of crosspoints:

iiiContents Electromagnetic Radiation Notice v Hardware Warranty and Software License vi Parts and Service vi Revision history vii 1 Gener

iv 7.2.2 Example: Several units connected by NCB 12 7.3 RS232 12 7.4 NCB 12 7.5 Commands 13 7.5.1 Audio crosspoint set 13 7.5.2 Audio cro

vElectromagnetic Radiation Notice The following information is given to note compliance with the United States Government Federal Communications Co

vi Hardware Warranty and Software License Please contact your local Thomson representative for hardware warranty and software license information.

vii Revision history Current revision of this document is the uppermost in the table below. Revision Replaces Date Change Description 2

BVS-0808 Rev. 2 1 1 General The BVS-0808 is an 8x8 video router with vertical interval switching. This state of the art router provides high